Advertisement
Document No. 565-957
Installation Instructions
August 12, 2005
To FLN 1 on the Open Processor
120 ohms
1/4 watt
-
+
Do NOT use
TB3 or TB4
1 2
3 4 5 6 7 8 9 10 11 12 13 14 15 16
Figure 2. Connecting the Siemens MXL Driver to the MXL System.
The standard practice used by MXL
installers would also require a 120-ohm
resistor between terminals 1 and 2.
Do NOT install a resistor across these
terminals.
Page 3 of 4
Siemens Building Technologies, Inc.
Advertisement
