Table of Contents
Advertisement
Quick Links
Contents
Important User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Required Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Visit the Music Lab Workstations web page at www.wengercorp.com.
Note: Please read and understand these instructions before starting the assembly.
Note: If you need additional information, contact Wenger Corporation using the information below.
©Wenger Corporation 2018
Wenger Corporation, 555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448
Questions? Call.....USA: (800) 4WENGER (493-6437) • Worldwide: +1-507-455-4100 • wengercorp.com
Select Lab Fixed Height
Hardware Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Workstation Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Optional Rackmount Shelf Assembly . . . . . . . . . . . . . . . . . . . . . . 18
Printed in USA 2018-07
Assembly Instructions
Workstation
Part #225D099-02
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Wenger Select Lab Fixed Height Workstation
Summary of Contents for Wenger Select Lab Fixed Height Workstation
-
Page 1: Table Of Contents
Visit the Music Lab Workstations web page at www.wengercorp.com. Note: Please read and understand these instructions before starting the assembly. Note: If you need additional information, contact Wenger Corporation using the information below. ©Wenger Corporation 2018 Printed in USA 2018-07 Part #225D099-02 Wenger Corporation, 555 Park Drive, P.O. -
Page 2: Important User Information
Wenger Corporation. Wenger Corporation does not assume any responsibility for any errors that may appear in these instructions. In no event will Wenger Corporation be liable for technical or editorial omissions made herein, nor for direct, indirect, special, incidental, or consequential damages resulting from the use or defect of these instructions. -
Page 3: Safety Precautions
• WARNING means that failure to follow the instruction may result in serious injury or death. • CAUTION means that failure to follow the instruction may result in serious injury or damage to property. Read all of these safety instructions before assembling the Select Lab Fixed Height Workstation. CAUTION CAUTION... -
Page 4: Hardware Parts List
Hardware Parts List X002540 250A508._ X003583 X003706 X000045 100A444 7 x 50mm 2-3/8” Grommet 2” 5-Knuckle #8 x 5/8” 8 x 25mm Corner Particle Board Screw Hinge Pan Head Screw Wood Dowel Bracket (color matched paint) X003074 X000824 X003600 X001503 X002971 Flush Mount #8-18 x 3/8”... -
Page 5: Workstation Components
Workstation Components Item Description Item Description 28 Shelf Wiring Panel Swivel Caster with Brake 29 Front Wiring Panel Standard Swivel Caster 30 Back Panel Adjustable Keyboard Bracket 31 Left Side Panel Bottom Fixed Shelf 32 Right Side Panel Wiring Access Door 33 Desktop Stiffener 34 Left Side Fixed Tube... -
Page 6: Assembly
Assembly 1. Connect the Shelf Wiring Panel (28) and Front Wiring Panel (29) together using six Wood Dowels (5) and five Black 7 x 50 mm Particle Board Screws (27). Shelf Wiring Panel (28) Wood Dowel Front Wiring Panel Black 7 x 50mm (29) Particle Board Screw (27) - Page 7 Assembly (continued) 3. Attach four Wiring Clamps (9) to the Back Panel using four #10-16 x 3/4” Sheet Metal Screws (10). #10-16 x 3/4” Sheet Metal Screw (10) Wiring Clamp 4. Attach two sets of 5-Knuckle Hinges (3) to the Back Panel using two #6 x 3/4” Flat Head Screws (21). Only one set of hinges will be attached if an optional Rackmount Shelf Accessory will be installed.
-
Page 8: Right Side Panel
Assembly (continued) 5. With the top facing up (the side without dowel holes), attach two sets of Door Stop Brackets (18) to the back side of the Desktop (33) using two #8 x 5/8” Sheet Metal Screws (17) in each. Desktop Only one set of brackets will be attached if an optional (33) - Page 9 Assembly (continued) 8. Use more than one person to attach the Desktop to the Front Wiring Panel and Right Side Panel using seven Wood Dowels (5) and three 7 x 50mm Particle Board Screws (1). Wood Dowel Tighten the Particle Board Screws Desktop 7 x 50mm...
- Page 10 Assembly (continued) 10. Attach the Left Side Panel (31) to the Desktop, Back Panel and Front Wiring Panel using six Wood Dowels (5) and eight 7 x 50 mm Particle Board Screws (1). Left Side Panel (31) Wood Dowel 7 x 50mm Particle Board Screw 11.
- Page 11 Assembly (continued) 12. Attach the Left Fixed Tube (34) and Right Fixed Tube (35) to the assembly using four 1/4-20 x 1.97 Machine Screws (17) and 1/4-20 Cap Nuts (20) in each. 1/4-20 Cap Nut (20) 1/4-20 x 1.97 Machine Screw (17) Left Fixed Tube...
- Page 12 Assembly (continued) 15. Attach seven Corner Brackets (6) to the Desktop, Side Panels and Front Wiring Panel using #8 x 5/8” Pan Head Screws (4) in each. #8 x 5/8” Pan Head Screw Corner Bracket 16. Attach two Adjustable Keyboard Brackets (38) to the bottom of the Desktop using five #10-16 x 3/4” Sheet Metal #10-16 x 3/4”...
- Page 13 Assembly (continued) 18. If attaching the Optional Fixed Shelf (39): a. Keep the narrower side of the Shelf at the same side as the Keyboard Brackets (this leaves room for a computer tower on the wider side of the shelf). b.
- Page 14 Assembly (continued) 19. Attach the Flush Mount Handle (7) to the longer Wiring Access Door (40) using two #8-18 x 3/8” Sheet Metal Screws (8). #8-18 x 3/8” Sheet Metal Screw Flush Mount Handle Wiring Access Door (40) 20. Attach a Wiring Access Door (40) to each Set of hinges in the Back Panel using two #6 x 3/4”...
- Page 15 Assembly (continued) 21. Attach a Stiffener (41) to the bottom on the back side of the Pullout Panel (42) using three #8 x 5/8” Sheet Metal Screws (16). #8 x 5/8” Sheet Metal Screw (16) Holes can be used to secure keyboard cables with the included 4”Nylon Ties (25). Front side has edge banding Pullout Panel (42) Back side is unfinished...
- Page 16 Assembly (continued) 24. Fit the back of both Drawer Glides into the slots of the Front Wiring Panel. Attach the Pullout Drawer to the Adjustable Keyboard Brackets using one 1/4-20 x 1/2” Carriage Bolt (11), 1/4 x 47/64” Flat Washer (13) and 1/4-20 Wing Nut (12) on each side.
- Page 17 Assembly (continued) 25. Attach Headphone Mount to the bottom of the Pullout Drawer using three #10-16 x 3/4” Sheet Metal Screws (10). Headphone Mount (43) can also be attached to the inside of the Right Side Panel. 26. Insert Grommets (2) into the Left, Right and Back Panels. Grommet #10-16 x 3/4”...
-
Page 18: Optional Rackmount Shelf Assembly
Optional Rackmount Shelf Assembly If installing the Optional Rackmount Shelf Assembly, the smaller Wiring Access Door and Hinges must be removed. Rackmount 1. Clip the Cage Nuts into the front of each individual Rackmount Shelf. Shelf Unit 10-32 x 3/4” Truss Screws are included to secure electronic components into the Rackmount. - Page 19 Optional Rackmount Shelf Assembly (continued) 4. Attach two 5-Knuckle Hinges to the top Rackmount Shelf using two #8-32 x 1/2” Flat Head Screws and two #8-32 Nylon Lock Nuts in each. #8-32 x 1/2” Flat Head Screw Be sure that the screws are seated flush with the hinges. Push-In 5-Knuckle Bumper...
- Page 20 This page is intentionally blank.
Need help?
Do you have a question about the Select Lab Fixed Height Workstation and is the answer not in the manual?
Questions and answers