Installation
Figure 11: Units on the same level
1
2
Limitations:The distance between the two units must not exceed 60 m in reality or the equivalent of 90 m taking into
account pressure drops. The height of the liquid line in relation to the unit base must be less than 5 m. It is
recommended to place a trap on the discharge line at the oil separator outlet, if this discharge line is horizontal for a
distance greater than 5 m, at a height greater than the connection to the oil separators.
Figure 12: RTCA (or other manufacturer's condenser) above the RTUB
4
Limitations:The distance between the two units must not exceed 60 m in reality or the equivalent of 90 m taking into
3
account pressure drops. Each 30 m level difference causes a 2% efficiency loss.
RLC-SVX03A-E4
17