If you experience difficulties after reading the manual and/or using the product, contact the Connect Tech reseller from which you purchased the product. In most cases the reseller can help you with product installation and difficulties. In the event that the reseller is unable to resolve your problem, our highly qualified support staff can assist you.
Carrier. Should this product, in Connect Tech Inc.'s opinion, fail to be in good working order during the warranty period, Connect Tech Inc. will, at its option, repair or replace this product at no charge, provided that the product has not been subjected to abuse, misuse, accident, disaster or non-Connect Tech Inc.
ESD Warning Electronic components and circuits are sensitive to ElectroStatic Discharge (ESD). When handling any circuit board assemblies including Connect Tech COM Express carrier assemblies, it is recommended that ESD safety precautions be observed. ESD safe best practices include, but are not limited to: ...
Introduction Connect Tech’s PMC/XMC Ultra Lite Carrier is an extremely small carrier board featuring rugged, locking connectors and offers the ultimate durability. The PMC/XMC Ultra Lite Carrier is ideal for space constrained applications, harsh environments, demanding conditions and supports extended temperature ranges of -40°C to +85°C.
COM Express DisplayPort 1 SD CARD microSD Card Connector P11/P12 Power Output (+12V,+5V) Power output for SATA and/or LVDS Vertical Screw Terminal Power Connector Document: CTIM-00431 Date: 2018-01-08 Page 10 of 28 Revision: 0.06 Connect Tech Inc. 800-426-8979 | 519-836-1291...
LVDS BLC CLK LVDS BLEN LVDS BLC DAT Note [1]: This voltage can be selected from Jumper J2 to be +3.3V, +5V, or +12V Document: CTIM-00431 Date: 2018-01-08 Page 13 of 28 Revision: 0.06 Connect Tech Inc. 800-426-8979 | 519-836-1291...
If you would prefer to have a single slot or both slots populated with half-length hardware at the time of your production order please contact sales@connecttech.com for further details. Document: CTIM-00431 Date: 2018-01-08 Page 14 of 28 Revision: 0.06 Connect Tech Inc. 800-426-8979 | 519-836-1291...
Page 15
+1.5V +1.5V SMB_CLK PCIe TX- SATA RX- SMB_DATA PCIe TX+ SATA RX+ USB D- USB D+ +3.3V +3.3V +3.3V +3.3V RESV RESV +1.5V +1.5V Document: CTIM-00431 Date: 2018-01-08 Page 15 of 28 Revision: 0.06 Connect Tech Inc. 800-426-8979 | 519-836-1291...
0471554001 Cable CBG090 Pinout Description CPU Fan Function CPU Fan Location Type Molex Solid Header with Friction Lock 22232031 Cable Pinout Description TACH +VCC Document: CTIM-00431 Date: 2018-01-08 Page 16 of 28 Revision: 0.06 Connect Tech Inc. 800-426-8979 | 519-836-1291...
Note [3]: USB 2.0 Port 7 can be optionally be used to enable the SD Card. Simply remove the Jumper from J8B to enable Document: CTIM-00431 Date: 2018-01-08 Page 18 of 28 Revision: 0.06 Connect Tech Inc. 800-426-8979 | 519-836-1291...
DisplayPort. The use of HDMI, DVI or VGA can be done through a simple dongle or cable assembly like the ones shown below. These can be purchased from any OEM vendor (such as www.startech.com) or directly through Connect Tech. Document: CTIM-00431 Date: 2018-01-08 Page 19 of 28 Revision: 0.06 Connect Tech Inc. 800-426-8979 | 519-836-1291...
Port B - SSTX- Port B - SSTX+ Port A - D- Port A - D+ Port B - D- Port B - D+ Document: CTIM-00431 Date: 2018-01-08 Page 20 of 28 Revision: 0.06 Connect Tech Inc. 800-426-8979 | 519-836-1291...
The CCG013 accepts a single power input to power all on-board devices. The CCG013 accepts a wide input range of +12V to +48V for operation. Function Power Location P10 FCI Pluggable Terminal Block Type 20020108-G041A01LF Pinout Description Document: CTIM-00431 Date: 2018-01-08 Page 21 of 28 Revision: 0.06 Connect Tech Inc. 800-426-8979 | 519-836-1291...
AD[10] AD[09] +5 V AD[08] +3.3 V C/BE[0]# AD[07] AD[06] AD[05] +3.3 V AD[04] V (I/O) AD[03] AD[02] AD[01] AD[00] +5 V +3.3 V Document: CTIM-00431 Date: 2018-01-08 Page 23 of 28 Revision: 0.06 Connect Tech Inc. 800-426-8979 | 519-836-1291...
+1.2V** +1.5V +1.8V +5V Standby +3.3V Standby POWER SATA ACT# GBE ACT# GBE LINK ** D32 Only on when on-board NAND option is implemented. Document: CTIM-00431 Date: 2018-01-08 Page 24 of 28 Revision: 0.06 Connect Tech Inc. 800-426-8979 | 519-836-1291...
All components on the CCG013 are rated to a maximum operating temperature of -40°C to +85°C. Mechanical Details A complete 3D STEP Model file of the carrier can be downloaded here: http://www.connecttech.com/ftp/3d_models/CCG013_3D_MODEL.zip Document: CTIM-00431 Date: 2018-01-08 Page 27 of 28 Revision: 0.06 Connect Tech Inc. 800-426-8979 | 519-836-1291...
CBG104 CTIC-00429 VGA to 10-Pin Minitek Cable CBG120 CTIC-00379 RJ-45 to 10-Pin Minitek Cable CBG117 CTIC-00433 SATA HDD Signal and Power Cable CBG090 CTIC-00347 Document: CTIM-00431 Date: 2018-01-08 Page 28 of 28 Revision: 0.06 Connect Tech Inc. 800-426-8979 | 519-836-1291...
Need help?
Do you have a question about the COM Express PMC/XMC Ultra Lite Carrier and is the answer not in the manual?
Questions and answers