Table of Contents
Advertisement
Enter VPI/VCI value and service category which is provided by your ISP, click next to enter the
next step. You will see the Figure 3-9.
Note:
The type of network protocol selected may be different in different areas, there are five types
（Figure 3-9）, so you should ask your ISP to acquire the local type of network protocol and
Encapsulation mode.
After choosing the proper protocol, enter the correct parameters supported by your ISP. Enable
the configurations, then you can surf on the Internet.
PPP over ATM (PPPoA)
If you select the protocol of PPP over ATM (PPPoA), you will see the Figure 3-10, enter the value
TD-8811/8811B
External ADSL2+ ROUTER
Figure 3-8
Figure 3-9
10
Advertisement
Table of Contents
