Maintenance; Recommended Maintenance Schedule(S) - Toro Workman 07235 Operator's Manual

Maintenance

Note:
Determine the left and right sides of the machine from the normal operating position.
Note:
Download a copy of the electrical schematic by visiting www.Toro.com and searching for your machine
from the Manuals link on the home page.
Important:
Refer to your engine owner's manual for additional maintenance procedures.
WARNING
Failure to properly maintain the machine could result in premature failure of machine systems
causing possible harm to you or bystanders.
Keep the machine well maintained and in good working order as indicated in these instructions.
Important:
Refer to your engine owner's manual for additional maintenance procedures.
CAUTION
Only qualified and authorized personnel should maintain, repair, adjust, or inspect the machine.
• Avoid fire hazards and have fire-protection equipment present in the work area. Do not use
an open flame to check fluid levels or leakage of fuel, battery electrolyte, or coolant.
• Do not use open pans of fuel or flammable cleaning fluids for cleaning parts.
CAUTION
If you leave the key in the key switch, someone could accidently start the engine and seriously
injure you or other bystanders.
Remove the key from the key switch and disconnect the wires from the spark plugs before
you do any maintenance. Set the wires aside so that they do not accidentally contact the
spark plugs.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
After the first 25 hours
After the first 100 hours
Before each use or daily
Maintenance Procedure
• Check the condition of the drive belt.
• Check the tension of the starter-generator belt.
• Change the engine oil.
• Change the engine-oil filter.
• Perform the guidelines for breaking in a new machine.
• Check the tire pressure.
• Check the engine-oil level.
• Check gear-shift operation.
• Check the brake-fluid level. Check the brake-fluid level before you first start the
engine.
24