Asus VP279 Series User Manual page 26

• Aspect Control: Adjust the aspect ratio to "Full", "4:3", or
"OverScan".
•
•
• VividPixel: ASUS Exclusive Technology that brings lifelike
visuals for crystal-clear and detail-oriented enjoyment. The
adjusting range is from 0~100.
• ASCR: Select ON or OFF to enable or disable dynamic contrast
ratio function.
• Adaptive-Sync/FreeSync: Allows an Adaptive-Sync or
FreeSync supported graphics source (HDMI and DisplayPort) to
dynamically adjust display refresh rate based on typical content
frame rates for power efficient, virtually stutter free and low-
latency display update.
•
• ELMB: Decreases motion blur and minimize ghosting part when
on-screen objects are fast-moving. This function is available
when the refresh rate is 75Hz.
•
• Position: Adjust the horizontal position (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100 (only available for VGA input).
• Focus: Reduce the Horizontal-line noise and Vertical-line noise
of the image by adjusting (Phase) and (Clock) separately. The
adjusting range is from 0 to 100 (only available for VGA input).
• Auto Adjust: Automatically perform Auto Adjust (only available
for VGA input).
3-6
4:3 is only available when the input source is in 4:3 format.
OverScan is only available for HDMI input.
If the Adaptive-Sync/FreeSync is enabled, the ELMB function is grayed out.
If the Adaptive-Sync/FreeSync is enabled, the ELMB function is grayed out.
Chapter 3: General Instruction