VP279QGL
To detach the base, perform the following:
1.
Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2.
Loosen the 4 screws securing the arm.
3.
Remove the stand assembly (arm and monitor base).
4.
Align and install the wall mount bracket on the rear of the monitor.
•
•
•
2-1
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
Use only the UL Listed Wall Mount Bracket with minimum weight/load
22.7kg (Screw size: M4 x 10 mm).
Screw holes for VESA wall mount
(100 x 100 mm)
Chapter 2: Setup