Lund Interceptor Quick Manual

Thank you for purchasing a LUND accessory; designed, engineered and built specifically for your vehicle. We have made
every effort to ensure that this hood deflector is top quality in terms of fit, durability, finish and ease of installation.
Package Contains: 1 Shield
Applications: Dodge Ram, Dodge Dakota
Installation Instructions
Please read carefully and completely before starting.
1. Clean hood of vehicle using hot soapy water, rinse
and dry thoroughly.
Grill mounting nuts
2. RAM: Open hood and loosen the grill mounting nuts and
the grill support mounting screws. Allow 1/4" to 3/8" gap
between hood and grill.
DAKOTA: Open hood and remove the grill mounting nuts.
Allow 1/4" to 3/8" gap between hood and grill.
3. RAM, DAKOTA: Gently slide shield between hood and grill.
Make sure that the shield is centered left to right on the hood.
®
RAM: grill support mounts
Tools Needed: 8mm (5/16") socket and ratchet
RAM: adjust for even spacing
4. RAM: Tighten the grill mounting nuts and grill support mount
screws. (NOTE: adjustment of the grill support may be required
to ensure even spacing between the grill and fender. This
adjustment is required for proper fit of the Lund fender shields.)
DAKOTA: Reinstall and tighten grill mounting nuts.
Proper Alignment
5. RAM, DAKOTA: Inspect fit to make sure shield is aligned
properly with grill. Loosen grill mounts and adjust shield
placement if necessary.
™
I-819A