Lund 26410026 Installation Instructions Manual

Lund 26410026 Installation Instructions Manual

Rock rail running boards for jeep wrangler
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Rock Rail Running Boards for Jeep Wrangler
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• To be used with Lund® branded products only.
• Do not stand on Lund running board or bracket while vehicle is in motion.
• Do not use the brackets as a jacking point for the vehicle.
• Do not use the bracket system or running boards to fasten cargo.
• Periodically check all components for tightness.
• Be sure to wear safety glasses while installing brackets.
•When using power tools, read and understand all operating instructions.
Contents
NOTE: Actual product may vary from illustration.
Tools Required
Ratchet and Extension
Preparation Before Installation
• Park your vehicle in a clean, level location. Check to make sure the vehicle is in park, or for manual drive models, place the
transmission in first gear. Engage the parking brake. Chock wheels.
• Unpack the kit and identify the parts according to the content descriptions.
• An assistant is recommended to help position the running board properly during the installation.

Installation Instructions

For proper installation and best possible fit, please read all instructions BEFORE you begin.
Driver Side Running
Board
Socket Set
Passenger Side Running
Wheel Chocks
Page 1 of 3
I - Sheet Number LUNDRB30 Rev.A
Lund Part# 26410026
Board
Safety Glasses

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 26410026 and is the answer not in the manual?

Questions and answers

Summary of Contents for Lund 26410026

  • Page 1: Installation Instructions

    Important Safety Information • To be used with Lund® branded products only. • Do not stand on Lund running board or bracket while vehicle is in motion. • Do not use the brackets as a jacking point for the vehicle.
  • Page 2: Installation Steps

    Installation Steps NOTE: Actual application may vary slightly from illustrations. Identify the (2) mounting locations for each bracket by looking under the driver side of the vehicle and finding the (2) locations where the vehicle body is mounted to the frame. Driver side front Beginning at the driver side front (location 1 above), remove the Position running board in place and slide mounting...
  • Page 3: Inspection After Installation

    You have purchased one of the many quality Lund branded products offered by Lund International, Inc. We take the utmost pride in our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in terms of fit, durability, finish and ease of installation.
  • Page 4 • À n'utiliser qu'avec des produits de la marque Lund®. • Ne pas se tenir sur le support ou le marchepieds Lund lorsque le véhicule est en déplacement. • Ne pas utiliser les supports comme point de levage pour le véhicule.
  • Page 5: Étapes De L'installation

    Étapes de l'installation REMARQUE : l'installation réelle peut différer légèrement des illustrations. Identifier les (3) emplacements de montage pour chaque support en regardant sous le véhicule côté conducteur et en repérant les (3) emplacements dans lesquels la carrosserie du véhicule est monté sur le cadre. Avant côté...
  • Page 6: Entretien Et Nettoyage

    Félicitations! Vous venez d'acheter un des nombreux produits de qualité de la marque Lund® fabriqués par Lund International, Inc. Nous sommes extrêmement fiers de la qualité de nos produits et nous espérons que vous profiterez de cet investissement de longues années durant.
  • Page 7: Instrucciones De Instalación

    Información importante de seguridad • Para usar solo con productos de Lund®. • No se pare sobre los estribos o soportes Lund cuando el vehículo está en movimiento. • No use los soportes como punto de apoyo del vehículo. • No use el sistema de soportes o los estribos para sujetar la carga.
  • Page 8: Pasos De Instalación

    Pasos de instalación NOTA: La aplicación real tal vez no sea igual a las ilustraciones. Identifique las (2) ubicaciones de montaje para cada soporte. Para ello, busque debajo del lado del conductor del vehículo las (2) ubica- ciones donde la carrocería del vehículo esté montada al bastidor. Parte delantera del lado del conductor Coloque el estribo en su lugar y deslice el soporte de...
  • Page 9: Cuidado Y Limpieza

    ¡Felicitaciones! ® Usted ha adquirido uno de los tantos productos de marca de calidad Lund que ofrece Lund International, Inc. Nos enorgullecen mucho nuestros productos y deseamos que disfrute años de satisfacción por su inversión. Nos hemos esforzado mucho para asegurarnos de que su producto sea de gran calidad en cuanto a ajuste, durabilidad, acabado y facilidad de instalación.

Table of Contents