Synchronization Of Strobes; Led Indicators - Siemens PAD-5-CLSA Installation Manual

Model PAD-5-CLSA
1
4.3
4.4
LED
H200
H202
H201
H203
H300
16
Siemens Industry, Inc.
Building Technologies Division

Synchronization of Strobes

NACs 5-8 have the same functionality as NACs 1-4. So configuring for synchronization
is done through the Zeus programming tool. Since the NACs are all part of the same
PAD-5-MB, they will always be synchronized with each other. For multiple PAD-5-MBs
requiring synchronization, refer to the PAD-5-MB instructions, section 3.2.2.1

LED Indicators

Color Condition
Yellow OFF
ON
Blinking
Yellow OFF
ON
Blinking
Yellow OFF
ON
Blinking
Yellow OFF
ON
Blinking
Yellow ON
OFF
Meaning
NAC 5 (Class A or B) is in normal condition
NAC 5 (Class A or B) is in Trouble – See panel for
event message
NAC 5 (Class A or B) has intermittent trouble (IN/OUT)
NAC 6 (Class B) is in normal condition – See panel for
event message
NAC 6 (Class B) is in Trouble – See panel for event
message
NAC 6 (Class B) has intermittent trouble (IN/OUT)
NAC 7 Class B (NAC 2 Class A) is in normal condition
– See panel for event message
NAC 7 Class B (NAC 2 Class A) is in Trouble – See
panel for event message
NAC 7 Class B (NAC 2 Class A)has intermittent
trouble (IN/OUT)
NAC 8 (Class B) is in normal condition – See panel for
event message
NAC 8 (Class B)is in Trouble – See panel for event
message
NAC 8 (Class B)has intermittent trouble (IN/OUT)
Manual Disconnect Activate – Releasing cannot
activate
Manual Disconnect Not Active – Releasing is ready in
standby
A6V101030359_en--_c