Sealey CST806 Instructions Manual

thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
instruction
manual
1. SafEty
Always distribute the load evenly over the surface of the bed of the platform truck.
9
Do Not leave unattended, especially when loaded, unless the wheels are chocked or the truck is otherwise secured.
8
Do Not use platform truck on uneven ground and do not run over kerbs or steps - use a ramp.
8
Do Not allow others to ride on the platform truck.
8
Do Not use the truck if any part is damaged, paying particular attention to the wheels. inspect it before use each time and replace
8
or repair damaged or worn parts immediately.
check tyre pressures on the platform truck on a regular basis.
9
Do Not over inflate the tyres. Recommended pressure is 25psi.
8
Do Not exceed maximum load capacity of 450kg.
8
Do Not allow children to play on, stand upon or climb on the cart.
8
Be mindful of the location of the handle it may fall from the upright position.
9
chock the wheels when loading and unloading the cart.
9
alWayS use caution when operating the platform truck. When moving it, proceed at a safe speed, especially at corners where there
9
could be a danger of the load shifting. extra care should be taken on inclined surfaces.
Do Not use the platform truck when you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
Do Not store material on the platform truck for an extended period of time.
8
2. iNtroDuctioN
Heavy-duty rust resistant steel construction. smooth steering action for easy manoeuvrability with soft rubber gripped handle and pneumatic
wheels for easy transportation over the toughest terrain. All four sides drop down using locking pin function for easy loading. can also be used
as a flat bed for transporting oversized items. Fitted with additional removable storage tray for carrying smaller items. Suitable for a variety of
warehouse, office, garden and domestic applications.
3. SpEcificatioN
model No: ................................................................. cSt806
maximum load capacity: ............................................... 450kg
Wheel size: ......................................................Ø300 x 90mm
internal size (length x width x depth): .... 1120 x 560 x 300mm
Platform height: .......................................................... 390mm
overall height: ............................................................ 650mm
© Jack sealey limited
instructions for
platform truck 450kg capacity
cSt806
model no:
Original Language Version cST806| Issue:3(L) 16/05/17