Product Overview; Structure; Table 1 Legend For The Configuration; Fig. 1 Structure Of A Cu8210-D001-0101 Wlan Stick - Beckhoff CU8210-D001-0101 Manual

Product overview

3 Product overview
With the CU8210-D001-0101 WLAN stick, Beckhoff Industrial PCs can be equipped with a WLAN module
and operated in client mode or as an access point, depending on the operating system.
The WLAN stick offers the encrypted exchange of data at a transfer rate of up to 433.3 Mbit/s and supports
20 MHz, 40 MHz and 80 MHz transmission bandwidths. The WLAN stick supports the IEEE 802.11 ac Draft
2.0 and 802.11 a/b/g/n specifications. The WLAN stick is downwardly compatible and enables
communication with older devices.
In addition, the WLAN stick supports the WiFi-Direct standard. A connection can thus be established
between two WLAN end devices without a central access point.
3.1

Structure

Fig. 1: Structure of a CU8210-D001-0101 WLAN stick.
Table 1: Legend for the configuration.
No. Component
1
Diagnostic LED [} 22]
2 Name plate
10
Description
The LED is located below the plastic.
The diagnostic LED indicates the status of the WLAN stick and, for
example, whether the WLAN stick is switched on or is connected to
a network.
The name plate can be used for the identification of the model. The
MAC address can be found here.
Version: 1.0 WLAN stick, NA