Table of Contents
Advertisement
Product overview
3
Product overview
The 4G USB stick is equipped with a GSM/UMTS/LTE modem, which makes a wireless connection to a
mobile communication infrastructure possible. Industrial PCs that require a mobile communication
connection can be retrofitted with the 4G USB stick.
The USB stick is available in three different country versions and enables global use for industrial
applications. The USB stick is downwardly compatible and supports the 2G and 3G band.
The USB stick enables the exchange of data at a transfer rate of up to 150 Mbit/s (DL) and 50 Mbit/s (UL)
and can also be controlled with the help of AT commands.
The equipment of the USB stick includes:
• a USB interface for the supply of power and data transmission,
• a slot for a Mini-SIM (2FF)
• a built-in main and diversity antenna
• two CRC9 (TS-5) interfaces for external antennas.
3.1
Structure
Fig. 1: Structure of a CU8210-D004-0101 4G USB stick.
Table 1: Legend for the configuration.
No.
Component
1
Diagnostic LED [} 15]
2
cover
3
External antenna
4
Installing a SIM card [} 12] Slot for the SIM card.
5
Name plate
10
Description
The diagnostic LED indicates the status of the USB stick and, for
example, whether the USB stick is switched on, whether a network
is within range or whether the USB stick has already established a
connection.
The SIM card slot is located under the cover.
Interface for the connection of an external antenna. A total of 2
CRC9 (TS-5) interfaces are available.
The name plate can be used for the identification of the model and
is located under the cover.
Version: 1.0
4G USB stick, AMER
Advertisement
Table of Contents
