Honeywell CL25AE Safety & Maintenance Manual page 3

SAFETY RULES (CONTINUED)
• Never pull the cord. Remove it from the electrical outlet/ socket by grasping and pulling on the
plug-end of the cord.
•
This appliance has been manufactured for use in domestic environments and must not be used
for other purposes.
• DO NOT use in areas where gasoline, paint or other flammable goods and objects are stored.
• When using the COOL setting, make sure the water tank is at Min Indicator Level. Operating the
unit on the COOL setting with an empty tank may result in damage to the water pump.
• DO NOT attempt to repair or adjust any electrical or mechanical functions of the Air Cooler, as
this may void the warranty.
•
DO NOT cover the cooler's air inlet or outlet, as this may damage the motor.
• DO NOT insert or allow objects to enter any ventilation or exhaust opening, as this may damage
the unit and may cause electrical shock or fire.
•
DO NOT operate with the Honeycomb Cooling Media removed, as this will overload and damage
the motor.
• DO NOT leave the operating appliance unattended for an extended period of time.
• DO NOT continue to operate the unit if it is damaged or if it malfunctions. Refer to the
TROUBLESHOOTING section and contact the CUSTOMER SUPPORT CENTER. Always place the
unit on a dry level floor.
• DO NOT use in bathrooms or near water. DO NOT keep the product where it may fall into a water
container.
• Store in a dry area when not in use.
• Always grip the side handles to move the Air Cooler.
• WARNING: To reduce the risk of fire or electric shock, do not use this appliance with any solid
state speed control device.
EN 2