Toshiba RD-XV48DTKF Owner's Manual page 56

E3NG0FD_EN.book Page 56 Wednesday, January 30, 2008 10:37 AM
5
Select a desired title using
[U \ D \ L \ P], then press [ENTER].
e.g.) HDD
Title List
ORG
21/ 01/ 08 07:00 22 SP
07:00 (00:30:00)
1
4
The title is now registered in the dubbing list.
6
Repeat steps
4
all the titles to be dubbed.
e.g.) HDD A DVD
HDD DVD
Add
Delete All
Dubbing Start
To delete a title:
1 Go to the dubbing list, then select a title
using [U \ D]. Then press [ENTER].
2 Select "Delete" using [U \ D], then press
[ENTER].
3 Select "Yes" using [U \ D], then press
[ENTER].
To move a title:
1 Go to the dubbing list, then select a title
using [U \ D]. Then press [ENTER].
2 Select "Move" using [U \ D], then press
[ENTER].
3 Select a desired insert point using [U \ D],
then press [ENTER].
To erase all the titles in the dubbing title list:
1 Select "Delete All" in the dubbing menu
using [U \ D], then press [ENTER].
2 Select "Yes" using [U \ D], then press
[ENTER]. Final confirmation message will
appear.
3 Select "Yes" using [U \ D], then press
[ENTER].
• To go back and forth between dubbing menu
and dubbing list, use [L \ P].
7
After adding all the titles you want,
select "Dubbing Start" in the
dubbing menu using [U \ D], then
press [ENTER].
56
EN
21/01/08 22 SP
1 2 3
5 6
1 / 6
to until you register
5
3000 MB
Dubbing List
1.01/01/08 0:00 P10 SP
1/1
8
Select a desired recording mode
using [L \ P], then press [ENTER].
e.g.) HDD A DVD
HDD DVD
Please select REC MODE.
XP SP LP EP
High
Dubbing Titles
Confirmation message will appear.
• Depending on the dubbing direction, the
available recording mode varies.
• When dubbing from HDD to DVD, you can select
"High" to perform the high speed dubbing (refer
to "Recording Mode for Dubbing" on page 53 for
more details).
9
Select "Yes" using [U \ D], then
press [ENTER].
Start Dubbing?
Yes
No
If dubbing continues when timer recording starts,
the next display will appear.
Timer Recording is in standby.
Start Dubbing?
Yes
No
Dubbing will start.
• It may take awhile to prepare for the dubbing.
To stop the dubbing in progress:
Press [C STOP] on the front panel.
Press [STOP C] for 2 seconds on the remote
control.
Note
• The device mode change is available only between
HDD and DVD during the videotape to the HDD /
DVD dubbing.
• Dubbing will be cancelled 2 minutes before starting
timer recording.
VHS to HDD / DVD
3
VHS A HDD
Select "VCR A HDD" using [U \ D],
then press [ENTER].
VHS A DVD
Select "VCR A DVD" using [U \ D],
then press [ENTER].
SLP
Auto
500 MB
3000 MB