Setting the exact time
TIM needs the exact time in order to operate precisely. Note that the clock also
has to be reset after any interruption in the power supply. If the time display is
highlighted there has been an interruption in the power supply. When you switch
the radio on, the FIRST INSTALL menu will appear automatically.
Setting the clock following an interruption in the power supply
•
Press
CLOCK and the time will be appear in the display header.
To set the clock
•
alter the hours by pressing
- MIN / MIN +
by pressing
the clock
press EXIT
. Return to the previous menu by way of the FIRST
•
INSTALL menu.
Displaying the time
The time will appear in the display header if you
•
press S briefly.
Correcting the time
The clock can be reset in the FIRST INSTALL menu and in the DSC-MAIN
MENU.
If necessary, call up one of these menus and set the exact time.
Using the FIRST INSTALL menu
•
Switch the unit off.
Press S (and hold it down) and switch the unit back on. The FIRST
•
INSTALL menu will appear in the display.
•
Select
CLOCK and set the correct time.
DEUTSCH
ENGLISH
- HOURS / HOURS +
. When you have completed resetting
FRANÇAIS
ITALIANO
S
and the minutes
S
NEDERLANDS
FIRST INSTALL
CLOCK
OWNER-ID
AUX-IN
NORM SET
CLOCK
12:27
- HOURS
HOURS +
- MIN
MIN +
SVENSKA
ESPAÑOL
CD - Betrieb (Option)
EXIT
EXIT
33
PORTUGUÊS