Front Wheel Assembly; Rear Wheel Assembly - Fisher-Price Town & Country Series Instructions Manual

Front Wheel Assembly

Front Wheel
Front Axle Tube
• Insert the front axle tube completely into the hole in the
front wheel.
Bolt
• Position the stroller with the handle on the floor.
• Place the front wheel between the fork.
• Insert the 3 13 / " bolt through the fork hole and into the
16
front axle tube.
• Attach the nut onto the end of the bolt.
• Tighten the nut with an adjustable wrench.

Rear Wheel Assembly

Nut
Please Note: To reduce friction and prevent excessive heat
build-up, lubricate the rear axles with a light oil before
assembly and regularly during use.
Flat Hub Side
Brake Pedal
• Turn the stroller on its side.
• Make sure the brake pedals are in the unlocked
(up) position.
• Position a rear wheel near the rear axle tube with the flat
hub side outward.
• Insert a rear axle into the rear wheel.
• Insert the end of the rear axle (with rear wheel) into the
rear axle tube.
• Pull the axle retaining knob out while pushing the rear
axle into the rear axle tube.
• Release the axle retaining knob and push the rear axle in
until you hear a "click".
5
Rear Axle
Rear Wheel
Rear Axle Tube
Axle Retaining
Knob