Fitting And Removing The Front Wheels; Applying The Brakes; Adjusting The Backrest - Fisher-Price Safe Voyage 10FP0101 User Manual

Fitting and Removing the Front Wheels

6
"Click"
fig. 13 fig. 14
To fit the front wheels, push the wheels onto the front legs until they click into place.
To remove the front wheels, lift apart the two retaining clips and remove wheel from leg
(fig.15).
Using the Front Swivel Wheels
Lock Release
fig. 16 fig. 17
To lock the swivel wheels, first ensure the front wheels are facing forward inline with the
chassis, then lift the lever up (fig.16).
To put the wheels in swivel mode, push the lever down on the front of each front wheel
(fig.17 & 18).
www.obaby.co.uk
fig. 15
fig. 18
Lock
fig. 19 fig. 20
To lock the brakes fully, push down on each brake lever using your foot (fig.19 & 20).
To release the brakes, lift each brake lever using your foot (fig.21).
Apply the brake before putting your child into the pushchair.
Apply the brake when the pushchair is stationary.
fig. 22 fig. 22a
To recline the backrest, unclip the support strap (fig.22). Lower the seat (fig.22a).
To put upright, do the reverse of the above (fig.23).
www.obaby.co.uk

Applying the Brakes

7
Release
fig. 21

Adjusting the Backrest

fig. 23