Advertisement
Installation Instructions
V1.0
PSDS2
Thank you for choosing our product! We strive to provide the best quality
and services for our customers. Would you kindly share your experience
on Amazon if you are satisfied? Should you have any issues, please don't
hesitate to contact us.
Telephone：800-5566-806 Mon-Fri 10am - 6pm (PST) (USA)
Email：supportus@perlesmith.com (US/CA/DE/UK/FR/IT/ES/JP/AU)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Perlesmith PSDS2
Summary of Contents for Perlesmith PSDS2
- Page 1 Installation Instructions V1.0 PSDS2 Thank you for choosing our product! We strive to provide the best quality and services for our customers. Would you kindly share your experience on Amazon if you are satisfied? Should you have any issues, please don't hesitate to contact us.
- Page 2 Component Checklist Glass shelf Glass bracket Wall Brackets End cap Connector Rubber pad Screw Screw Bolt Concrete Anchor Washer Connector STEP 1 1A : MOUNT WALL PLATE ON SINGLE STUD Use wall plate ③ to mark three mounting hole Find the stud by the stud finder locations.
- Page 3 Secure the wall mount with Drill pilot holes using a 1/8 in. (3.2 mm) the lag bolt. diameter drill bit. Level 2.2in. (55mm) 1B : MOUNT WALL PLATE ON CONCRETE Use wall bracket holes to mark 3 mounting locations. Drill 3 pilot holes into concrete Use level to ensure proper alignment.
- Page 4 STEP 2 STEP 3 Attach the glass brackets to the wall brackets. Secure the screws and the connector Put glass bracket above wall bracket and let the glass bracket slide down. STEP 4 STEP 5 Attach the end caps Paste the rubber pad 6 onto the glass bracket THESE SCREWS MUST BE TIGHTENED.
Need help?
Do you have a question about the PSDS2 and is the answer not in the manual?
Questions and answers