Picture Control Adjustment; Adjusting The Picture Preference - Toshiba MW20FP1 Owner's Manual

Picture control adjustment/

Adjusting the picture preference

Picture controls are factory preset but you can adjust them individually as
follows:
And also you can select four picture modes—Standard, Sports, Movie, and
Memory—as described in the following table:
Picture control adjustment
1
Press MENU, then press
option.
MENU
SETUP
ENTER
2 Press or to select "PICTURE", then press
.
ENTER
3
Press or to select the item you want to
adjust, then press
setting.
ENTER
Selection
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
Note:
The CONTRAST default setting is set to maximum
(+32) at the factory.
4
After your desired setting press MENU
repeatedly until the menu screen is cleared.
MENU
SETUP
3 3 3 3 3 To return all adjustments to the factory preset levels
Press CANCEL while making picture adjustments.
5L00201C [E]p27-32
or to select
or to adjust the
Pressing
darker lighter
lower higher
paler deeper
reddish greenish
softer sharper
31
Adjusting the picture preference
1
Press MENU, then press
option.
MENU
SETUP
ENTER
2
Press or to select "PICTURE
PREFERENCE", then press
ENTER
3 Press or to select the desired picture
mode, then press ENTER.
ENTER
Mode Picture quality
STANDARD Standard picture quality (factory-set)
SPORTS Bright and dynamic picture (factory-set)
MOVIE Movie-like picture setting (factory-set)
MEMORY Your personal preferences (set by you;
see "Picture control adjustment" as left)
4 After your desired setting press MENU
repeatedly until the menu screen is cleared.
MENU
SETUP
20/4/04, 16:06
CANCEL
MENU
ENTER
or to select
.
31