Other Functions (Vcr); Duplicating A Video Tape - Toshiba MW20FP1 Owner's Manual

Other functions (VCR)

Duplicating a video tape

If you connect the unit to another VCR or Camcorder, you can
duplicate a previously recorded tape. Make all connections before
turning on the power.
Duplicating a video tape
Preparation:
• Press TV/VCR to select the TV/VCR mode.
• Load a cassette tape with the erase prevention tab
intact.
Load a previously recorded tape into the playback
•
VCR or Camcorder.
1
Press SP/SLP to select the desired tape speed
SP or SLP.
It is recommended that you set the
SP/SLP
Speed to the SP mode on the
recording VCR for best results.
RETURN
Press INPUT SELECT once or twice to select
2
AUDIO/VIDEO input position.
"LINE1" or "LINE2" will appear on the
screen.
INPUT
SELECT
ZOOM
LINE1: on the rear panel
LINE2: on the front panel
3 Press both REC at the same time.
REC
4 Press PLAY on the playback VCR or camcorder.
5 Press STOP after duplicating a video tape.
STOP
Note:
Unauthorized recording of copyrighted television programs, films,
video cassettes and other materials may infringe the rights of
copyright owners and be contrary to copyright laws.
42
5L00201C [E]p42-43
LINE1
42
Connection with second video recorder
• Select "LINE1" on step 2.
Playback VCR
To VIDEO OUT
Audio/Video cable (not supplied)
Recording VCR
VHF/UHF
Connection with Camcorder
• Select "LINE2" on step 2.
Playback Camcorder
Recording VCR
To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN
Audio/Video cable (not supplied)
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer's
instructions. A typical camcorder dubbing hookup is
shown above.
20/4/04, 16:07
TV/VCR
3
STOP
2
1
To AUDIO (R) OUT
To AUDIO (L) OUT
OUT PUT LINE 1 IN To VIDEO IN
VIDEO VIDEO
DIGITAL AUDIO
L L (MONO)
COAXIAL
AUDIO AUDIO
R R
To AUDIO (L) IN
To AUDIO (R) IN
To AV Jack
Illustration of MW20FP1