Sound Control Adjustment; Stereo And Second Audio Program (Sap) - Toshiba MW20FP1 Owner's Manual

TV operation

Sound control adjustment/

Stereo and Second Audio Program (SAP)

Sound controls are factory preset but you can adjust them individually as follows:
The unit is equipped with a feature known as multi-channel TV sound or MTS.
MTS broadcasts greatly enhance TV viewing by bringing you programs with high
fidelity stereo sound.
MTS also provides an extra channel called the Second Audio Program or SAP
which broadcasters can use to transmit a second language for bilingual transmis-
sion or for other purposes.
Sound control adjustment
1
Press MENU, then press
option.
MENU
ENTER
SETUP
2
Press or to select "AUDIO", then press
ENTER
3 Press or to select the item you want to
adjust, then press
setting.
ENTER
BASS: Press
TREBLE: Press
BALANCE: Press
from both speakers.
SURROUND: Press
ON: The dynamic presence and sound created offers
a thoroughly enjoyable listening experience.
OFF: Normal sound.
STABLE SOUND : Press
ON: The Stable Sound feature limits the highest
volume level to prevent extreme changes in
volume when the signal source is changed.
OFF: Normal sound.
SAP : Press
ON: SAP is available.
OFF: SAP is not available.
4
After your desired setting press MENU
repeatedly until the menu screen is cleared.
MENU
SETUP
3 3 3 3 3 To return BASS/TREBLE/BALANCE control adjustments
to the factory preset levels
Press CANCEL while making sound adjustments.
32
5L00201C [E]p27-32
or to select
or to adjust the
or to adjust the bass sound.
or to adjust the treble sound.
or to obtain an equal sound level
or to select "ON" or "OFF".
or to select "ON" or "OFF".
or to select "ON" or "OFF".
32
Listening to stereo sound
When the TV is turned on or a channel selection is
made, make certain the "STEREO" appears on the
screen. This means that Stereo broadcasting is avail-
able. You can enjoy stereo sound from the left and
right speakers.
• When mono broadcasting is received, no indication is
displayed.
• If the broadcast signal is not strong enough or clear
. stereo sound is not available, press AUDIO SELECT
to change to mono sound. The noise should be
eliminated. Press it again to return to the stereo sound.
Listening to SAP (Second Audio Program)
When the TV is turned on or a channel selection is
made, make certain the SAP appears on the screen.
This means that the Second Audio Program broad-
casting is available.
To select desired sound
Press AUDIO SELECT to select the desired sound.
Broadcast SAP setting
MONO OFF
ON
STEREO OFF
ON
MONO+SAP OFF
ON
STEREO+SAP OFF
ON
20/4/04, 16:06
AUDIO SELECT
CANCEL
MENU
CH 013
STEREO
CH 013
STEREO SAP
STEREO
Audio display
MONO
MONO
STEREO MONO
STEREO MONO
MONO
SAP
STEREO MONO
SAP