Playback Procedure - Toshiba MD13M1 Owner's Manual

RECALL TV/DVD
1 2
4 5
7 8
CLOSED
SLEEP
CAPTION
0
TOP MENU SUBTITLE AUDIO
SET UP/MENU DVD MENU
CANCEL
CH +
RETURN
CH –
REV PLAY FWD
SKIP STOP SKIP
SLOW PAUSE SLOW
Note:
•
If a non-compatible disc is loaded, "Incor-
rect Disc", "Region Code Error" or "Paren-
tal Error" will appear on the TV screen ac-
cording to the type of loaded disc. In this
case, check your disc again (See pages 25
and 37).
• Some discs may take a minute or so to start
playback.
• When you set a single-faced disc label
downwards (ie. the wrong way up) and
press PLAY or CLOSE on the unit, "Read-
ing" will appear on the display for 10 sec-
onds and then "Incorrect Disc" will continue
to be displayed.
•
Some playback operations of DVDs may be
intentionally fixed by software producers.
Since this unit plays DVDs according to the
disc contents the software producers de-
signed, some playback features may not be
available. Also refer to the instructions sup-
plied with the DVDs.
• When playing DTS-encoded Audio CDs,
excessive noise will be heard from the ana-
logue stereo outputs. To avoid possible
damage to the audio system, the consumer
should take proper precautions when the
analogue stereo outputs of the DVD player
are connected to an amplification system.
POWER
INPUT SELECT
3
GAME
6
9
VOLUME
ANGLE
ZOOM/CH RTN
SELECT/ENTER
PLAY MODE
JUMP
REPEAT A–B

Playback procedure

1
Press OPEN/CLOSE on
the unit. The disc tray will
open.
2
Place a disc onto the tray.
Hold the disc, position it
with the printed label side
up, align it with the guides,
and place it in its proper
position.
3
Press PLAY or OPEN/
CLOSE on the unit.
The disc tray closes auto-
matically.
On the TV-screen,
changes to "Reading" and
then playback
commences.
• A menu screen will
appear on the TV screen,
if the disc has a menu
feature.
4
Press / or
5
Press SELECT.
• Title is selected and play commences.
6
Press STOP to end playback.
• The unit records the stopped point, depending on the
disc. " " appears on the screen. Press PLAY to resume
playback (from the scene point).
• If you press STOP again or unload the disc ("
on the screen.), the unit will clear the stopped point.
7
To stop the playback, press STOP.
Then press OPEN/CLOSE on the unit.
The disc tray opens.
Remove the disc and press OPEN/CLOSE on the unit then
press POWER.
The disc tray closes automatically and unit turns off.
Reading
/ to select title.
" appears
27