Playback Procedure - Toshiba MD20FN1/R Owner's Manual

RECALL TV/DVD
1 2
4 5
7 8
CLOSED
SLEEP
CAPTION
0
TOP MENU SUBTITLE AUDIO
SETUP/MENU DVD MENU
CANCEL
CH +
VOL –
RETURN
CH –
REV PLAY FWD
SKIP STOP SKIP
SLOW PAUSE SLOW
NOTES:
• If a non-compatible disc is loaded, "Incor-
rect Disc", "Region Code Error" or "Paren-
tal Error" will appear on the TV screen ac-
cording to the type of loaded disc. If these
appear, check your disc again (see pages
25 and 36).
• Some discs may take a minute or so to
start playback.
• When you set a single-faced disc label
downwards (ie. the wrong way up) and
press PLAY or OPEN/CLOSE on the unit,
" " will appear on the display for 3 about
seconds and then "No Disc" will be dis-
played.
• Some playback operations of DVDs may
be intentionally fixed by software produc-
ers. Since this unit plays DVDs according
to the disc contents the software produc-
ers designed, some playback features may
not be available. Also refer to the instruc-
tions supplied with the DVDs.
• When playing DTS-encoded Audio CDs,
excessive noise will be heard from the
analogue stereo outputs. To avoid possi-
ble damage to the audio system, the con-
sumer should take proper precautions
when the analogue stereo outputs of the
DVD player are connected to an amplifi-
cation system.
POWER
INPUT SELECT
3
GAME
6
OPEN/CLOSE
9
MUTE
ANGLE
ZOOM/CH RTN
VOL +
ENTER
PLAY MODE
JUMP
REPEAT A–B

Playback procedure

1
Press OPEN/CLOSE on
the unit or the remote con-
trol.
The disc tray will open.
2
Place a disc onto the tray.
Position it with the printed
label side up, align it with
the guides, and place it in
its proper position.
3
Press OPEN/CLOSE or
PLAY.
The disc tray closes auto-
matically.
The TV-screen, changes
to " " and then playback
commences.
• A menu screen will
appear on the TV screen,
if the disc has a menu
feature.
4
Press / or
5
Press ENTER.
• Title is selected and play commences.
6
Press STOP to end playback.
• The unit memorizes the stopped point, depending on the
disc. " " appears on the screen. Press PLAY to resume
playback (from the scene point).
• If you press STOP again or unload the disc ("
on the screen.), the unit will clear the stopped point.
7
To stop the playback, press STOP.
Then press OPEN/CLOSE.
The disc tray opens.
Remove the disc and press OPEN/CLOSE then press
POWER.
The disc tray closes automatically and unit turns off.
/ to make a selection.
" appears
27