Table of Contents
Advertisement
IceAge Anleitung_e
Trouble Shooting
Before bringing to the service centre, please check the followings:
Problems
The compressor makes
some unusual noise when
the "Power On Indicator"
is "On"
The "Power On Indicator"
does not light
The "Ice Full Indicator"
keep on blinking
NOTE:
Please contact our service centre for replacement if problems are not caused by the
above reasons.
The unit is in normal good condition if the following occurred
•
The fan is still running for few seconds after switching "Off" the unit and the compressor.
•
Noise caused by the running compressor and the flowing refrigerant inside the compressor.
19.12.2007 15:17 Uhr
Possible Reasons
Incorrect power supply.
– No power supply
– Bad contact with the
power outlet
Ice Baffle are blocked by
ice cubes. It can not
works properly
Seite 6
Solution
Unplug the unit, and check to ensure
correct power supply is used.
Check both the power cord, power
plug and power outlet
Remove the ice cubes, turn off the
ice maker. And then turn on again
Advertisement
Table of Contents
