Table of Contents
Advertisement
IceAge Anleitung_e
Maintenance
1.
Always keep the unit stand still at up-right position while moving to avoid causing damage to the
compressor of the unit.
2.
Plug the unit into a power outlet alone. Make sure your electricity supply is 187-242V~50Hz, the
current is 10A.
3.
To disconnect the power, grip the plug and pull it from the wall outlet. Never drag the cord. If the
power cord is damaged, bring it to the service centre for replacement.
4.
The unit should be placed vertically. Do not place the unit near flammable items or fire source.
Keep at least 20cm distance from the surroundings for better ventilation and operation.
5.
Initially when switching "On" the unit, it will takes sometimes before water is cooling down to zero
degree. Duration of ice cube making will be prolonged if adding more water.
6.
If the water level is lower than the minimum water level of the Water Tank, the "Lack Water"
indicator will light, indicating manual water filling is required. If using external water inlet pipe for
water supply, the "Lack Water" indicator will blink, indicating water filling starts automatically.
7.
Use only drinking water to make the ice cube. Never use dirty water as it may damage your health.
Clean the unit frequently after each usage.
8.
Clean the water ejector if water is not flowing well.
9.
Install the "Ice Cube Tray" in correct position to avoid touching the Ice Shovel
10. If no water is adding to the unit when the "Lack water" indicator light up, the unit will stops running
automatically.
11. Always keep the sensors clean from rust for better performance.
12. Do not open the Lip Cover of the unit during running as it may affects the ice cubes making per-
formance.
13. Unplug the unit from the power outlet and remove all ice cubes before cleaning. Use a dilute
solution of water and vinegar to clean the interior of the ice maker, and then rinse it with drinking
water thoroughly. Do not rinse internal components of this unit. Do not use gasoline to wash this
unit.
14. Remove the Drain Plug from the unit to drain the remaining water from the water tank and let it
clean and dry when the unit will not be used for a long period.
15. When using the external water pipe for water supply, the unit will stops running if there are no
water supply coming from the pipe.
19.12.2007 15:17 Uhr
Seite 5
Advertisement
Table of Contents
