Description; Specifications; Standard Equipment - RIDGID K-750 Operator's Manual

K-750 Drain Cleaning Machine
• Do not operate machine if operator or machine is
standing in water. Will increase the risk of electrical
shock.
• Wear safety glasses and rubber soled, non-slip
shoes. Use of this safety equipment may prevent se-
rious injury.
• Use the K-750 to only clean drain lines. Follow in-
structions on the use of the machine. Other uses or
modifying the drain cleaner for other applications may
increase the risk of injury.
Description, Specifications and

Standard Equipment

Description

The RIDGID K-750 Drain Cleaning Machine will clean
drain lines 3" to 10" in diameter and 200 feet in length de-
pending on size of cable. Corrosion resistant cable drum
" diameter cable or 125 feet of
holds 100 feet of 3 /
4
ameter cable. Cable spins at 200 RPM.
The drum is belt-driven by a
has a grounded electrical system. An integral Ground
Fault Interrupter (GFCI) is built into the line cord. A "kick-
stand" base is provided for machine stability during
operation. A pneumatic foot actuator provides ON/OFF
control of the motor.
The cable has a quick change coupling system for con-
necting or disconnecting tools. An optional power feed
advances or retracts the cable at a rate up to 20 feet per
minute. A manual feed option is also available.

Specifications

Line Capacity ..................Depends on choice of cable.
Refer to the following chart for
recommendations.
Cable Size
and Type
" Cable
All 5 /
8
" Hollow Core
3 /
4
" Inner Core
/
3
4
NOTE! Inner-Core Cable is not recommended for use
through P-Traps and severe bends in lines
smaller than 4".
Optional 24" flexible trap leaders can be added
to aid users through traps and tight clean-outs.
Drum Capacity...............100' of
125' of
Motor ...............................115V, Reversible, Single
Phase, AC (60 Hz)
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
4
" di-
5 /
8
1 / HP electric motor that
2
Recommended Line
Size and Reach
Line Size Reach
3" to 4" 200'
3" to 6" 200'
4" to 10" 200'
" Cable or
3 /
4
" Cable
5 /
8
TestEquipmentDepot.com
Rating........................... 1
Amps............................6.5
Weight (Machine Only)..95 lbs.
Dimensions
Length..........................26"
Width............................21"
Height ..........................43"
Standard Equipment
Machine Options - Autofeed
Catalog No. Model
No. Description
115V-60Hz 230V-50Hz
41977 44202 K-750 Machine with Gloves and
Autofeed -
51402 51407 K-750 Machine with Gloves and
Autofeed -
42002 44207 K-750 Machine with One Pair of Gloves,
w/C-75 Autofeed, Standard
and C-75, 75' x
42007 44212 K-750 Machine with One Pair of Gloves,
w/C-100 Autofeed, Standard
and C-100, 100' x
42012 44217 K-750 Machine with One Pair of Gloves,
w/C-27 Autofeed, Standard
and C-27, 75' x
K-750 Machine with One Pair of Gloves,
47047 —
w/C-24 Autofeed, Standard
and C-24, 100' x
Machine Options - Manual Feed
51342 — K-750 Machine with One Pair of Gloves
" Tool Set Includes:
Standard 3 /
4
• T-406 Spear Blade Cutter
• T-407 Retrieving Auger
• T-411 2" Cutter
• T-413 3" Cutter
• T-414 4" Cutter
" Tool Set Includes:
Standard 5 /
8
• T-403 3" P-Trap Cutter
• T-406 Spear Blade Cutter
• T-413 3" Cutter
• T-407 Retrieving Auger
• T-411 2" Cutter
/ HP @ 1725 RPM
2
Weight
lb. kg.
114 51.9
" Pigtail
3 /
4
113 51.3
" Pigtail
5 /
8
206 93.6
" Tool Set,
3 /
4
" Cable
3 /
4
234 106.3
" Tool Set,
3 /
4
" Cable
3 /
4
182 82.7
" Tool Set,
5 /
8
" Cable
5 /
8
" Tool Set,
5 /
8
" Cable
5 /
8
104 47.3