Draining Water From Drum; Loading Cable In Drum - Powerfeed Machine; Accessories - RIDGID K-750 Operator's Manual

K-750 Drain Cleaning Machine
Figure 11 – Removing Pigtail Anchoring Bolt
3. Remove the pigtail from drum by pulling it through the
guide tube.
4. Insert new pigtail by pushing it through the guide tube
into the drum.
5. Align hole in pigtail fastener with the hole in the back
of the drum. Insert bolt, washers and nut and tighten
securely. Push the remainder of the pigtail into drum.

Draining Water From Drum

Orient drum so that drain hole in its back is down. Lay
machine on its back and water will drain from drum.
Remove plug with a flathead screwdriver.
Loading Cable In Drum – Powerfeed
Machines
For power feed machines, the cable can be loaded using
the feed mechanism. Lay entire length of cable on flat
surface in line with drum front. Start machine and adjust
feed mechanism to retract cable into drum. Note, cable
will move sideways on ground while in operation. Loading
with assistance of power feed will ensure cable lays
correctly in drum and eliminate chance of vibration.

Accessories

Only the following RIDGID products have been designed
to function with the K-750 Drain Cleaning Machine. Other
accessories suitable for use with other tools may be-
come hazardous when used on the K-750. To prevent
serious injury, use only the accessories listed below.
Solid Core, Integral Wound Cables (IW) are stiffer, less
flexible versions of
Cables and Flexible Leaders
5 / " (16mm)
8
5 / " (16mm)
8
3 / " (20mm)
4
3 / " (20mm)
4
Accessories
Ridge Tool Company
WARNING
" cable.
5 /
8
Model
No. Description
C-25 25' Flexible I.C. Cable (7,6m)
C-26 50' Flexible I.C. Cable (15,2m)
C-27 75' Flexible I.C. Cable (22,9m)
C-24 100' Flexible I.C. Cable (30,5m)
C-24 IW 100' IW Solid Core Cable
(Integral Wound) (30,5m)
C-27HC 75' Hollow Core (22,9m)
C-24HC 100' Hollow Core (30,5m)
C-28 25' I.C. Cable (7,6m)
C-29 50' I.C. Cable (15,2m)
C-75 75' I.C. Cable (22,9m)
C-100 100' I.C. Cable (30,5m)
C-75HC 75' Hollow Core (22,9m)
C-100HC 100' Hollow Core (30,5m)
" x 2' Leader
T-458 5 /
8
" x 2' Leader
T-468 3 /
4
" Pigtail
— 5 /
8
" Pigtail
— 3 /
4
Model
No. Description
A-7558 Drum Assembly w/
A-7534 Drum Assembly w/
A-75 Power feed Assembly
— Front Guide Hose Assembly
— Pair of Work Gloves
A-3 Tool Box
— Cable Rust Inhibitor, 1 Quart
— Cable Rust Inhibitor, 1 Gallon
" Pigtail
5 /
8
" Pigtail
3 /
4
13