Advertisement
Available languages
Available languages
3.9
Reel holder and thread guides
18
V
@
©
4
5
2
6
1
8
7
An unhindered unwinding of the needle thread is made
possible
by an
extended draw-off course and as few deflecting points as possible.
Screw off the old reel holder.
Screw off cone support and roll-off arm.
-
Join the enclosed reel holders 2 and 4 with the sleeve
5.
Mount cone support and roll-off arm.
The distance between roll-off arm and
cone
support should be as
!arge as possible.
Plug up the two holes 6 in the roll-off arm
with the
enclosed rubber
stoppers 1.
Plug up the central hole of thread guide 7 and the hole
of the
hind
thread guide 7 with the enclosed rubber stoppers.
Advertisement
