Advertisement
Available languages
Available languages
3.5 Cable securing at the circuit board
2
1
The motor connection cable and the wiring laid in the base plate are
secured at the base plate by means of the sheet meta! angle
1.
Screw off screw 2 from the solenoid actuator.
Lay sheet meta! angle on top of the cables and
w
ires and
screw
tight with screw 2.
3.6
Mounting a new belt protection
16
6
5
4
3
The new belt protection is provided with a recess 5 for the two
switches
6.
Position belt protection 4 and
screw tight.
Position handwheel 3 and screw tight.
Advertisement
