Table of Contents
Advertisement
CANOPY INSTALLATION:
1. POWER OFF THE FREEZER. REMOVE FOOD INSIDE.
2. CHECK and PREPARE PARTS and TOOLS
•
Open the carton box, take out foam package and dispose appropriately. Recycle when possible.
•
Check parts and quantities as listed in Parts Diagram above.
•
Tool Preparation: Utility Knife, Philips Screw Driver, Flat Head Screw Driver, Electric Drill with 3.2 Bit.
•
Store all empty packages in the carton in case they need to be reused.
NOTE: Unplug the freezer and relocate any food inside to another cold storage appliance before
installation of canopy.
3. INSTALLATION GUIDELINES
•
Remove lid guide tab from frame front.
•
Score the front frame lid guide tab several times.
•
Cut through the front frame lid guide tab and pull from frame.
•
Smooth cut area on frame with small file.
4. ASSEMBLE the FIXED STRIPS
•
Slide one side of the rectangular connector all the way into the left end of the front fixed strip lot.
•
Slide the other side of the rectangular connector all the way into the side slot of the left fixed strip.
•
Securely screw bolt M5X5 into the corresponding holes in the two strips.
•
Repeat steps 1 - 3 for the right side of the front fixed strip and the right fixed strip.
8
Hide quick links:
Advertisement
Table of Contents
