Quax PROMO 05 05 1200EN Series Manual page 23

Bath and diaper cabinet

Available languages

PROMO

05 05 1200EN-xx

Use 4.2 : Use the top E1, both barriers E2, both cross bars E3 and four bolts M6*48 mm

Put the barriers (E2) on top of the worktop (E1) with the provided openings facing downwards. Position a

cross bar (E3) with its provided drillings in front of the holes on the barriers (E2). Insert two bolts (M6*48)

through these drillings and slightly tighten. Repeat these operations for the second cross bar (E3).

Step 4.3 : Use the parts of step 4.1 and 4.2 as well as four bolts M6*30 mm

Place the upper structure (E) on the provided support blocks on the upper crossbars. Push the bolts

(M6*30) through the drillings at the bottom of the blocks and fasten in the top.

Bad- en luiermeubel

Baignoire et table à langer

Wickel- und Bademöbel

Bath and diaper cabinet

Quax

First dreams

First steps

Table of Contents