Advertisement
TROUBLESHOOTING
Remote signals are not detected
Ensure there are no interferences or obstacles between you and your dog.
Ensure the remote and the receiver are fully charged.
Ensure the remote and receiver are not in standby mode?
Avoid switching modes frequently.
Press the buttons firmly in the centre.
Charge the receiver and transmitter fully.
Ensure all the adjustable modes are set above level 1.
Check the channel and ensure you are on the same channel as the collar it is
paired with.
Check to see if the metal screw caps are too short; if they are, change them.
Re-pair the remote and the receiver.
SPECIFICATIONS
Frequency
Transmitter
Receiver
433MHz
3.7V
3.7V 300ma LIP
Advertisement
