Advertisement
Synchronise the Remote and Receiver
1.
Turn on the remote by pressing the vibration button and select one of the signals
by pressing the CH button.
2.
Adjust the levels by pressing"+" or"-" button (ensure the level is above 1).
3.
Press the power button on the receiver and wait at least 5 seconds: you will hear a
confirmation tone and the indicator light will be flashing.
4.
Press the Vibration button within 10 seconds and a tone will sound again to confirm
the pairing is successful.
5.
If you have multiple receivers, simply choose a different channel and pair as per the
same instructions.
The remote and receiver(s) should now be paired. Pairing is necessary to control the
receiver.
You should then test each of the functions before attaching the collar to your pet.
Test the vibration function using the vibration button: the receiver should vibrate.
Test the sound function using the sound button: the receiver should produce a
tone.
Test the light function using the light button: the white LED on the receiver should
illuminate.
To attach:
1.
Attach the receiver to the collar and place the collar around your pet's neck.
2.
Attach the rubber caps that came with the product to the touch points.
3.
Adjust the collar so that a finger can be inserted between the collar and your pet's
skin but it is not loose.
Advertisement
