Advertisement
OPERATION
Know the intensity of each mode
Knowing the intensity of each mode will be helpful to control the stimulation.
Setting the Initial Training Level
To set the initial training level you must first determine the lowest stimulation that will
clearly get your dog's attention by the following steps:
1.
Set stimulation at zero.
2.
Fit the collar properly on your dog's neck and start the training.
1.
If he does not focus on you, begin the stimulation and progressively increase the
levels until he responds to the
indicates that the level is too high.
Every dog is individual and unique. Some are more sensitive than others and some learn
more slowly or quickly. Be sure to test out each level on each individual dog.
Stopping Unwanted Behaviours
For this type of training, you need to set the collar at a predetermined stimulation level as
outlined above.
1.
Let your dog roam in the area where he might misbehave, for example eating from
the rubbish.
2.
Get yourself out of his sight or at a discreet distance and wait.
3.
When the dog misbehaves, press the button. This will cause your dog to associate
the signal with his misbehaviour. If he doesn't respond, you can increase the level.
Tips:
Timing is crucial. Catching the unwanted behaviour and sending the signal at the precise
moment can drastically shorten training time.
beep/vibration.
If your dog yelps or jumps, this
Advertisement
