Advertisement
PREPARATION
Charge the remote and receiver before first use for upwards of 5 hours.
The charging indicators will flash during charging and be solid when charging is
complete.
The collar cannot receive any signals while it is charging.
The remote will show a low battery icon when it needs to be charged.
The receiver's indicator will flash when it needs to be charged.
The standby battery life is about a month. Charge the device once a month even if
it is not used to maintain battery health.
Tips:
To avoid pressing the wrong button when switching through modes, select the mode by
pressing it once and then press it again to activate it. You can also long press to reselect
the modes (there may be 1 - 2 second delay when switching).
Auto Power Saving Function
The remote will fall into sleep mode after 30 seconds of no interaction. You can
reactivate it by pressing any button.
If there is no operation within 5 minutes the receiver will fall into standby mode,
which is shown by the unlit indicator light. The receiver can be reactivated once it
is wobbled. You don't need to press any button on the remote or receiver to
reactivate the receiver.
The receiver can be turned off by pressing the power button on the receiver.
Advertisement
