Hardi Navigator Series Maintenance And Service Manual page 2

HARDI NAVIGATOR
HARDI NAVIGATOR Maintenance and Service Manual
Part number 67021404
MARCH 2003 Edition
Published by HARDI AUSTRALIA Pty Ltd
Adelaide, South Australia
Copyright © 2002 HARDI AUSTRALIA Pty Ltd
All rights reserved
Writing and layout by HARDI AUSTRALIA Pty Ltd
Printed in Australia
www.hardi.com.au
2
HARDI AUSTRALIA Pty Ltd assumes no responsibility for any errors,
inaccuracies or possible omissions in this publication.
Illustrations, technical information and data are to the best knowledge
of Hardi Australia Pty Ltd, correct at the time of printing.
HARDI AUSTRALIA Pty Ltd reserves the right to make changes in
design, features, accessories, specifications and instructions at any
time and without notice.
HARDI AUSTRALIA Pty Ltd is without any obligation in relation to
products purchased before or after such changes.
All operators of the equipment dealt with by this publication must read
this entire publication prior to operating any of the equipment. The
safety section must be thouroughly read and understood.
Failure to do so may result in injury or death.
After changing chemicals or crops it is essential that the entire
spraying system be flushed and thoroughly decontaminated in
accordance with the chemical manufacturer's instructions (refer to the
chemical label). . This includes disconnecting hoses from the self
cleaning filter and pressure relief valve and cleaning any residue and
sediment found in the hoses, valve and filter.
Failure to do so may lead to potential crop damage.