Expansion Cards - Dell OptiPlex GX1 Service Manual
Small-form-factor systems
Hide thumbs
Also See for OptiPlex GX1:
- Service manual (178 pages) ,
- User manual (175 pages) ,
- Reference and installation manual (174 pages)
Table of Contents
Advertisement
Removing and Replacing Parts: Dell OptiPlex GX1 Systems Service Manual
PANEL
PARALLEL
PCIn
POWER_1
POWER_2
RISER
SERIALn
SLOT1
TAPI
USB
VIDEO_UPGRADE
Expansion Cards
The small-form-factor GX1 chassis can accommodate up to two half-length 32-bit PCI expansion cards.
Figure 23 shows an example of a 32-bit PCI expansion card.
Figure 23. 32-Bit PCI Expansion Card Example
Removing an Expansion Card
CAUTION: Use a wrist grounding strap as explained in
To remove an expansion card, perform the following steps:
1.
Remove the computer
2. If necessary, disconnect any cables connected to the card.
3.
Remove the expansion-card
file:///C|/infodev/2013/eDoc/OpGX1/SM/remsff.htm[2/21/2013 11:45:32 AM]
Control panel connector
Parallel port connector, sometimes referred to as LPT1
PCI expansion-card connector (on riser board)
Main power input connector
3.3-V power input connector
Riser board connector
Serial port connectors
Microprocessor connector
Telephony connector
USB connector
Video-memory upgrade socket
cover.
cage.
"Precautionary
Measures."
Advertisement
Table of Contents
