Vendor Total Report - TEC EM1-31064 Owner's Manual

15. TOTAL OPERATION
A Individual Total
Ex.) Individual PLU Total (PLU #100)
1
B Block Total
Ex.) UPC Block Total (UPC #100100~100199)
1
NOTE: The
followed by an appropriate number of
C Zone Total
Ex.) PLU Zone Total (PLU #100~107)
1
D Entire PLU Total
PRT
*
NOTES:1. When setting the PLU zone, it is not necessary to enter the beginning number which is smaller
than the end number.
2. When issuing a block or a zone total report, a PLU with no sales record is not printed. If all
PLUs of the block or zone have no sales record, only the total is printed.
3. Pressing the C key in the middle of issuing a reset report stops printing and data is not
cleared.

15.4 VENDOR TOTAL REPORT

3
PRT
0 0
0 0 1
key represents 0 through 9. The most significant digit in the starting number is
0 0 PLU
PRT
*
(Individual)
*
PRT
*
keys.
1 0 7
(All)
Enter an individual vndor #.
15-3
15.4 VENDOR TOTAL REPORT
PRT
*
PRT
*
EM1-31064