TEC EM1-31064 Owner's Manual page 86

14. OPERATING PROCEDURES
(2) Restraints in case of clerks' name printing on labels
1) "GRADE LINE" can not be selected and printed.
2) Commodity name can not be printed on the 4th line of 57 mm width label and
3) The printing position of clerk name will be selected by the initial setting for
Price deletion
Prices already registered can be deleted in the following procedure.
Enter the deletion mode.
NEXT PLU: the next item
VOID: the previous item
Delete a registered price.
Exit the deletion mode.
Subtotal
The following procedure will sum up all of the registered items.
2nd line of 48 mm width label, because 1 line of commodity is used for clerk's
name printing.
GRADE LINE position.
Initial 3-6 (G. Line Print Position)
0: Right side on bottom line of commodity name
1: Left side on bottom line of commodity name
If you would like to switch the initial setting # please contact your authorized
TOSHIBA TEC representative.
Enter vendor #.
Enter vendor #.
Press:
Enter prices.
Press:
A receipt will be issued.
VOID
NEXT
VOID
or
PLU
PRT
*
C
ST
PRT
*
14-21
14.13 FLOATING VENDOR
Press:
C
(Cancel)
EM1-31064