Singer Merritt 2404 Instruction Book page 59

Multi·Stitch Zig·zag BarTacks
With the rnulti-stitch zig-zag you can make strong bar
tacks. Multi-stitch zig-zag bar tacks areeffective for
tacking belt
tocos
on heavy fabrics such as denim. Se
sure'to check the Fabric, Thread and Needle Tabie on
page 16 for correct threadand needle selection with
your choice of fabrico
• Stitch: Multi-Stltch Zig-Zag
Disc 2
• Needle Position: L
~
R
• Stitch Width:
---~
• Stitch Length: O
to
4
• Snap-in feed cover.
• General purpose foot or special purpose fool.
We recommend making a test sample first using
scraps of the material you will be sewing the bar tacks
on, duplicating ali thicknesses.
1.
Mark position for the finished end of belt loopon
the fabrico
• Place belt loop, wrong side up, straight stitch with
cut end 3 mm (1/8 inch) from edge of garment; do
not stitch beyond edges of the belt loop. Trim the
end close to the stitching and press.
2.
Fold belt loop back on the stitching line and press.
• Set your machine accordínq to the coce above.
• Stitch 3 mm (1/8 inch) from the fold using the
multi-stitch zig-zag.
3.
Fold over loose end and bar tack.
58