Configuring And Activating The Directv Receiver - DirecTV EpicVue Owner / Operator Installation Manual

7

Configuring and Activating the DIRECTV Receiver

Now let's activate the satellite system. For proper activation, the dome cannot be indoors.
Please make sure for this step, the dome has a clear line of sight of the South-Southeastern
sky, where the satellite signal can reach you. The signal does not pass through buildings, trees,
or any other obstructions.
2.
If you purchased the separate local area
antenna, when the Auto Tune screen is displayed,
press OK and proceed (otherwise you can skip
this process). Allow time for it to scan for local
channels that are in the area.
Once a few channels are found, end channel scan,
and exit out of it.
Configuring and Activating the DIRECTV Receiver
www. T Vformytruck.com/installation
1.
Now power on the power-strip and push the
button on the front of the Epicvue AC Power Box.
If the TV is brand new out of the box, follow the
prompts and go through the standard set up.
Refer to the TV manual or Driver Quick tips if you
have any questions.
3.
Press the Input button on the TV remote and
select HDMI.
17