Siemens DF8000 Installation Function & Configuration Commissioning Safety Regulations page 6

2
Building Technologies
Fire Safety & Security Products
Notational conventions
The meanings of the symbols used in this manual are as follows:
Pay particular attention to texts marked with this symbol. Failure to observe this
warning may endanger your life, destroy the device, or lead to loss of data.
Supplementary information, remarks, and tips follow this symbol
Standard symbols
Result
Italics
" " Quotation, reproduced identically
Cross reference
(...) Brackets contain supplementary text, suggestions etc.
Document identification
Position
Front page
Last page
Abbreviations
SBT Siemens Building Technologies
DMS Danger Management Systems
MM8000 SBT FS DMS Management Station
MK8000 SBT FS DMS OPC Server for subsystems
MT8001 SBT Management Terminal
LAN Local Area Network
WAN Wide Area Network
FTP File Transfer Protocol
CNAP CerCom Native Application Protocol
LON® Local Operating Network, registered trademark of Echelon Corp.
BACnet®
Building Automation Control Network, protocol standard approved as the
ANSI/ASHRAE/ISO Standard 135-2004
Operational and safety regulations
Before beginning work on the system you must have read and understood the
related documents, in particular the "Safety regulations" section.
Liability disclaimer for damage or injuries
Before products are delivered, they are tested to ensure they function correctly
when used properly. Siemens disclaims all liability for damage or injuries caused
by the incorrect application of the instructions, or the disregard of danger adviso-
ries. This disclaimer applies in particular to personal injuries or damage caused by:
− Improper and/or incorrect use;
− Disregard of safety instructions in the documentation or on the product;
− Poor maintenance or a lack of maintenance.
We have checked the contents of this manual for agreement with the hardware and
software described. Since deviations cannot be precluded entirely, we cannot
guarantee full agreement. However, the data in this manual are reviewed regularly
and any necessary corrections included in subsequent editions. Suggestions for
improvement are welcome.
Details shown
– System names
– Product type
– Purpose of document
Date of issue
–
Document number
–
048_DMS_DF8000_ICC_MP4.15_A6V10081388_c_en.doc
06.2008