Siemens DF8000 Installation Function & Configuration Commissioning Safety Regulations page 12

8
Building Technologies
Fire Safety & Security Products
Dip switches for
option settings
Fig. 3 Example of DF8000 system:
three double units connected in multi-drop configuration
Backward compatibility with CF9000 modules and NK8000 firmware
DF8000 family fully replaces the CF9000 devices. New DF8000 modules can be
used to replace the corresponding CF9000 modules as illustrated in Tab.1 below.
Note also the compatibility across Composer configurations (and related protocol),
DF8003/CF9003 hardware, and NK8000 firmware versions (Tab.2).
Old models New models
CF9003 DF8003
CF9020 DF8020
CF9040 DF8040
Tab.1. Replacement of CF9000 modules
Composer I/O CPU hardware
CF9003 CF9003 or DF8003
DF8003 DF8003
Tab.2. NK8000 Version Compatibility
DMS8000
Management Station
NK8000 unit (e.g. NK8223)
RS232 / RS485
converter
LED indicating
I/O status
Terminals
for I/O lines
Notes
No modifications required in the Composer project
NK8000 Notes
Any version
MP4.15 or higher NK8000 must support the improved
CMXDL protocol for DF8003
048_DMS_DF8000_ICC_MP4.15_A6V10081388_c_en.doc
ACTIVE/INACTIVE
input
ALARM/TAMPER
input
Relay Output
Flat cable
connection
06.2008