Projection on the screen (continued)
Remote control
ON /
STANDBY
INPUT
KEYSTONE
AUTO SET
FREEZE
MUTE
PIP
CALL
RESIZE
MENU
VOL / ADJ
2,3
ENTER
EXIT /
P.MODE
CT-90106
Control panel
(Main unit side)
ON / STANDBY
VOL / ADJ
2,3
2
When a projector is used for the first time, the language selection menu, which is to select a
language for displaying menus or messages, is displayed. Select a desired language. (At
shipping from factory, it is set to English.)
2
3
ENTER
ENTER
2
Notes
• The language selection menu will not be displayed on the second and subsequent times you
turn on the power. However, if "Reset all"
be displayed when the power is turned on next.
• The language can also be selected on the menu screen.
• This Owner's manual is described on the supposition that English was selected.
4
Select a desired language with the
selection buttons ( / ), and
ENTER
press ENTER.
ENTER
A menu confirming the selection result is
displayed in the selected language.
Press ENTER to confirm.
Press EXIT to return to step 2 if you want to re-select a
language.
51
is executed, the language selection menu will
Turn on the connected equipment and put it in
playback mode.
Select "Cancel" or install driver contained in the supplied
CD-ROM, when the dialog box of the Add New Hardware
Wizard screen appears on the computer when connecting a
computer. (The supplied CD-ROM contains a driver information
file named TOSHIBA_TLP.inf. Click the Browse button of the
dialog box to find and designate this file.)
CONTENTS
49
Continued
28