Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Efitment B015
Summary of Contents for Efitment B015
- Page 1 REAR DRIVE MAGNETIC UPRIGHT BIKE MODEL NO.: B015 IMPORTANT! Read all instructions carefully before using this product. Save this manual for future reference. EXERCISE EQUIPMENT QUESTIONS: Contact customer service at service@zoovaa.com USER MANUAL...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS At Efitment your safety is our top priority and to make sure both you and the unit remain in perfect working order, we encourage you to read all the instructions before assembling and using your new Efitment machine. -
Page 3: Exploded Drawing
EXPLODED DRAWING... -
Page 4: Parts List
PARTS LIST Description Qty. Description Qty. Main Frame 40L/R Left Belt Cover Front Stabilizer Clasp D20 Rear Stabilizer Wave Washer D20 Screw M10*20 Washer D20 Spring Washer D10 Bearing 6004RS Washer D10 Nut M6 Handlebar Post Screw M6*20 Handlebar Screw M6*15 Wire Plug φ13 Belt Wheel Screw ST4.2*20... -
Page 5: Hardware Package
HARDWARE PACKAGE... - Page 6 ASSEMBLY INSTRUCTIONS Step 1: Remove 4 Screws (No.4), 4 Spring Washers (No.5), and 4 Washers (No.6) from the Front & Rear Stabilizer (No.2 & 3) with an Allen Wrench (No.78). Attach the Front & Rear Stabilizer (No.2 & 3) to the Main Frame (No.1) using the 4 Screws (No.4), 4 Spring Washers (No.5) 4 Washers (No.6) that were removed.
- Page 7 Step 3: Attach the Pedals (No. 35L/R) to the Cranks (No.36L/R). The Right Pedal (No.35R) is marked R, and the Left Pedal (No. 27L) is marked L. Screw the Right Pedal (No.35R) clockwise into Right Crank (No. 36R), and the Left Pedal (No.35L) counter-clockwise into Left Crank (No.
- Page 8 NOTE: ADJUSTING THE SEAT SLIDER When securing the Knob (No.28), the handle on Knob (No.28) may not have enough space to turn (See drawing on right). If this happens, the handle can be adjusted. To adjust the handle, pull on the handle, turn the handle to a position that is not blocked, and release the handle.
- Page 9 Step 7: Remove 3 Screws (No.12) from the Meter (No.18). Attach Meter (No.18) to the Meter Bracket (No.19) using the 3 Screws (No.12) that were removed. Tighten and secure with a Spanner (No.77). NOTE: There are 6 holes A/B/C/D/E/F in back of the Meter (No.18).
-
Page 10: How To Move The Bike
HOW TO MOVE THE BIKE Hold the Handlebar (No.8) and lift the bike until wheels on the Front Stabilizer (No.2) touch the ground. Now you can wheel the bike to the desired location. - Page 11 ADJUSTMENTS GUIDE ADJUSTING THE RESISTANCE The Tension Control (No.23) has 8 levels. To increase resistance, move the Tension Control (No.23) down. To decrease resistance, move the Tension Control (No.23) ADJUSTING THE SEAT POSITION The Seat (No.34) of this bike is fully adjustable as it moves Up, Down, Forward, and Backward.
-
Page 12: Computer Instructions
COMPUTER INSTRUCTIONS FUNCTION BUTTONS MODE: 1. Press the button to select TIME, DISTANCE and CAL to preset. 2. Press the button to select any function display values on LCD or enter any values to preset. 3. Press and hold the button for 2 seconds to reset all the values to 0 except the Odometer. (When the user replaces batteries, all the values will reset to ZERO automatically.) SET: To set up the target value of TIME, DISTANCE and CAL. - Page 13 3. AUTO SCAN: After the computer is power on or press Mode key, the LCD will display all functions from TIME-SPEED-DISTANCE-CALORIES-ODOMETER-PULSE. Each value will be held for 4 seconds. 4. SPEED: Display the current training speed from 0.0 to 99.9 KPH or MPH. 5.
- Page 14 SPECIFICATIONS: AUTO SCAN Every 4 seconds TIME 00:00 ~ 99:59 CURRENT The maximum signal can be pickup is 99.9 SPEED MI/H FUNCTION TRIP DISTANCE 0.00~99.99 MI or 0.00~9999 MI CALORIES 0.1~999.9 KCAL 0.1~999.9 MI or 1 ~ 9999 MI PULSE RATE 40~206 BPM BATTERY TYPE 2pcs of SIZE –AAA or UM –4...
Need help?
Do you have a question about the B015 and is the answer not in the manual?
Questions and answers