Efitment IC033 User Manual

Efitment IC033 User Manual

Pro fit belt drive indoor bike
Hide thumbs Also See for IC033:

Advertisement

PRO FIT
BELT
DRIVE INDOOR BIKE
MODEL NO.:
IC033
IMPORTANT! Read
all instructions
carefully before
using this product.
Save this manual for
future reference.
EXERCISE
EQUIPMENT
QUESTIONS:
Contact customer
service at
service@zoovaa.com
USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IC033 and is the answer not in the manual?

Questions and answers

Janver Derrington
January 17, 2025

What repairs are needed to stop the rattling and banging sounds while i **** peddling?

Summary of Contents for Efitment IC033

  • Page 1 PRO FIT BELT DRIVE INDOOR BIKE MODEL NO.: IC033 IMPORTANT! Read all instructions carefully before using this product. Save this manual for future reference. EXERCISE EQUIPMENT QUESTIONS: Contact customer service at service@zoovaa.com USER MANUAL...
  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS At Efitment your safety is our top priority and to make sure both you and the unit remain in perfect working order, we encourage you to read all the instructions before assembling and using your new Efitment machine.
  • Page 3: Exploded Drawing

    EXPLODED DRAWING...
  • Page 4: Parts List

    PARTS LIST Description Qty. Description Qty. Main Frame Belt Wheel φ200*24 Rear Stabilizer Elastic Washer GB/T 859-1987 8 Carriage Bolt GB/T 12-1988 M8*52 Spacer φ25*φ20.05*11.5 End Cap Material: PP Crank Bearing 6004ZZ Flat Washer GB/T 95-2002 8 Left Belt Cover 738*95*400 Domed Nut GB/T 802-1988 M8 Screw GB/T 15856.1-2002 ST4.2*16 (H=16mm)
  • Page 5 Description Qty. Description Qty. Flywheel Spindle φ16*φ12*160 Bolt GB/T 70.1-2000 M8*45 Sleeve φ16*φ12.1*36 Belt Wheel Holder Flywheel 20KG Pulley φ43*28 Right Decorative Cover 164*37.5*32 Flat Washer φ25*φ11/t2.5 Sensor SR-212 Adjustment Knob M10*25 Sensor Holder LTF8163 Hexagonal Nut Magnet c-02Z Inner Hexagon Spanner Pulse Sensor Match Φ25 Tube Crosshead Spanner Pulse Sensing Line...
  • Page 6: Hardware Package

    HARDWARE PACKAGE...
  • Page 7: Assembly Instructions

    ASSEMBLY INSTRUCTIONS 1. PREPARATION BEFORE STARTING ASSEMBLY: A. Make sure that you have adequate work space around the item. B. Use the hardware package provided when assembling unit. Confirm necessary parts and tools are available (Note: Instruction Sheet above will have an exploded drawing with all single parts marked with numbers).
  • Page 8 STEP 3: Release the Adjustment Knob (No.10), and insert Handlebar Post (No.17) into Main Frame (No.1). Set at desired height, and then tighten Adjustment Knob (No.10). Attach Handlebar (No.18) Handlebar Post (No.17) using L-Shaped Knob (No.13) and Flat Washer (No.14). NOTE: Make sure L-Shaped Knob...
  • Page 9 STEP 4: Note: The Pedals (No.27L/27R) are marked "L" and "R" for Left and Right. Make sure you attach the correct pedal to the corresponding crank. Attaching the pedal to the wrong crank can cause irreversible damage to both the pedal and the crank.
  • Page 10: Tension Adjustment

    TENSION ADJUSTMENT A. Adjusting the Tension: Increasing or decreasing the tension allows you to add variety to your workout sessions. To increase the tension, rotate the Brake Knob (No.49) clockwise. To decrease the tension, turn the Brake Knob (No.49) counter-clockwise. B.
  • Page 11: Seat And Handlebar Adjustment

    SEAT AND HANDLEBAR ADJUSTMENT The seat of this bike is fully adjustable as it moves Up, Down, Forward, Backward. A. To adjust the height of the Vertical Seat Post (No.12), loosen and pull on the Adjustment Knob (No.10), then raise or lower the seat to the desired height.
  • Page 12: Balance Adjustment

    BALANCE ADJUSTMENT To achieve a smooth and comfortable experience, you must ensure that the bike is stable. During use, if you notice that the bike is unbalanced, you can adjust the Base Levelers (No.7) located beneath the Front and Rear Stabilizers (No.2/8). To adjust, use the crosshead spanner to loosen the Nut (No.87) by turning it clockwise.
  • Page 13: Belt Tension Adjustment

    BELT TENSION ADJUSTMENT If you feel any slippage when pedaling, the belt may need to be tightened. This may happen after a long period of use. To tighten the belt, loosen Nut (No.87) counter clockwise, turn Bolt (No.82) clockwise to tighten, then tighten Nut (No.87) clockwise.
  • Page 14: How To Move The Bike

    HOW TO MOVE THE BIKE Firmly grasp and hold each side of the Handlebar (No.18). Place one foot on the front base and tilt the bike towards you until the transport wheels on the front base touch the ground. With the wheels on the ground, you can transport the bike to the desired location with ease.
  • Page 15: Computer Instructions

    COMPUTER INSTRUCTIONS BUTTON: 1. MODE: Press this button to select speed、distance、time and clock functions. 2. SET: Hold the button for 3 seconds to total reset all function values and confirm all function values. FUNCTION: 1. TIME: The total working time will be shown when starting exercise. 2.
  • Page 16 STORAGE TEMPERATURE -10°C ~ +60°C (-14°~140℉) Version 1.1...

Table of Contents