Using Of Appliance; Display Controls - Brandt BFU584YNW Instruction Manual

3. USING OF APPLIANCE

Display controls

Use your appliance according to the
following control regulations.
corresponding functions and modes at
the control panel are shown in the
picture below. When the appliance is
powered on for the first time,
backlighting of the icons on display panel
starts working. If no buttons have been
pressed and the doors are closed, the
backlighting will turn off.
Controlling the temperature
We recommend that when you start
your refrigerator for the first time, the
temperature for the refrigerator is set
to
-18°C. If you want to change the
temperature, follow the
below.
Caution! When you set a temperature,
you set an average temperature for the
whole refrigerator
Temperatures inside each compartment
may vary from the temperature values
displayed on the panel, depending on
how much food you store and where
you place them. Ambient temperature
may also affect the actual temperature
inside the appliance.
1. Freezer
Press "Freezer"
The
temperature between -14℃ and -24℃ as
needed, and control panel will display
corresponding values according
the
2. Super Freeze
Super Freeze will quickly lower
the temperature
freezer so food will freeze
faster. This can lock in the
vitamins and nutrients of fresh food and
keep food fresh longer.
Press "Super
●
activate the super freeze function. The
light will come on and the freezer
temperature setting displays -24℃ .
In case of the maximum amount of
●
food to be frozen, please wait about
24 h.
Super freeze automatically switches
●
off after 26 hours.
When super freeze function is on you can
switch off super freeze function by
pressing "Super Freeze" or
button, then the freezer
setting will revert back to the previous
setting or the "Eco Energy" function will
be activated.
3. Eco Energy
The
freezer work in a
instructions
saving mode which is useful
for when you are away on
holiday by reducing energy consumption.
Pressing "Eco Energy" button for 3
cabinet.
seconds until the light comes on.
When the Eco Energy function is
●
activated, the temperature of the freezer
is automatically switched to-15℃ to
minimize the energy consumption.
13
to set freezer
within the
Freeze" button to
"Freezer"
temperature
function makes the
power