Connection - Toshiba TDP-T100 Owner's Manual

Connection

Before connection
• Read the owner's manual of the device you are connecting to the projector.
• Some types of computer cannot be used or connected to this projector.
Check for an RGB output terminal, supported signal
• Turn off the power of both devices before connecting.
• The figure is a sample connection. This does not mean that all of these devices can or
must be connected simultaneously. (Dotted lines mean items can be exchanged.)
Computer
Computer
(for control)
To
p.52
RS-232C
To audio
terminal
output
Audio cable
Control cable
(not supplied)
Audio cable
(not supplied)
Audio cable
(not supplied)
To audio
output
To audio input
White (L)/Red (R)
Audio amplifier, etc. DVD video recorder, etc.
p.50 , etc.
Video recorder,
Computer DVD player, etc.
To audio
output
White (L)/
Red (R)
To audio
To RGB
output
output
To RGB
Audio cable
output
(not supplied)
RGB cable
(not supplied)
RGB cable
Audio cable
(supplied)
(not supplied)
Monitor cable Mini
D-sub 15P-BNC
(not supplied)
To Y/C /C
B R
output
Green (Y)/Blue
(C )/Red (C )
B R
Conversion
To audio output
adapter BNC-pin
White (L)/Red (R)
(not supplied)
Video recorder, etc.
22
Notes
• The COMPUTER 1 IN terminal functions identically to the COMPUTER 2 IN terminal.
• The MONITOR OUT terminal outputs signals from the COMPUTER 1 IN terminal or the
COMPUTER 2 IN terminal, or outputs Y/P
input is selected, the MONITOR OUT terminal outputs the input signals last selected for
each input terminal
• Signals are output from MONITOR OUT terminal even in standby mode.
However, from AUDIO OUT terminal, no audio signal is output.
• A computer monitor cannot accept Y/P
• The AUDIO IN terminal doubles for devices connected to COMPUTER terminals 1 and 2.
• When an AUDIO OUT terminal is connected, sound is not output from the projector
speaker.
• Output volume of AUDIO OUT terminal can be adjusted by the VOL button.
To S-video
• Moving pictures played back on computers using DVD software may appear unnatural if it
output
is projected with this projector, but it is not a malfunction.
S-video cable
(not supplied)
AV cable
(not supplied)
To video
output
/P as selected with the INPUT button. If no
B R
/P signals correctly.
B R
23